Customized Flexible PCB (FPC) Professional Flexible PCB and Rigid Flex PCB Board

• Customization: Available
• Structure: Multilayer FPC
• Material: Polyimide
• Model NO.: FL895
• Combination Mode: Without Adhesive Flexible Plate
• Application: Digital Products, Computer with LCD Screen, Mobile Phone, Aviation and Aerospace
• Conductive Adhesive: Conductive Silver Paste
• Board Material: Polyimide
• Board Thickness: 1.6 Mm
• Copper Thickness: 1 Oz (35um)
• Surface Treatment: HASL Lead Free
• Transport Package: Vacuum+Carton Packing
• Specification: UL, SGS, ROHS
• Trademark: FL
• Origin: China
• HS Code: 8534009000
• Production Capacity: 20000 Square Meter/Mon

Product Description

Product Description

Commodity Introduction

This is a type of polyimide PCB for the application of Sensor. It's a single sided layer board at
0.1mm thick. The base laminate is from ITEQ, Solder mask and silkscreen from Taiyo. It's fabricated per IPC 6012 Class 2 using supplied Gerber data. Each 10 boards or panels are packed
separately. 
 

Parameters & Data Sheet

PCB SIZE	65 x 43mm=1PCS
BOARD TYPE
Number of Layers	double
Surface Mount Components	YES
Through Hole Components	no
LAYER STACKUP	copper ------- 35um(1oz)
	Polyimide 0.1mm
TECHNOLOGY
Minimum Trace and Space:	12mil/12mil
Minimum / Maximum Holes:	2.5mm
Number of Different Holes:	1
Number of Drill Holes:	2
Number of Milled Slots:	0
Number of Internal Cutouts:	0
Impedance Control	NO
BOARD MATERIAL
Glass Epoxy:	Polyimide 0.1mm, FPC
Final foil external:	1oz
Final foil internal:	0oz
Final height of PCB:	0.1mm ±0.05
PLATING AND COATING
Surface Finish	Electroless nickel over Immersion Gold (ENIG)( 1 µ" over 100 µ" nickel)
Solder Mask Apply To:	TOP
Solder Mask Color:	Yellow, Coverlay
Solder Mask Type:	LPSM
CONTOUR/CUTTING	Laser cut
MARKING
Side of Component Legend	TOP
Colour of Component Legend	White, IJR-4000 MW300, Taiyo Supplied.
Manufacturer Name or Logo:	Marked on the board in a conductor and  leged FREE AREA
VIA	None Plated Through Hole(NPTH)
FLAMIBILITY RATING	UL 94-V0 Approval MIN.
DIMENSION TOLERANCE
Outline dimension:	0.0059" (0.15mm)
Board plating:	0.0030" (0.076mm)
Drill tolerance:	0.002" (0.05mm)
TEST	100% Electrical Test prior shipment
APPLICATION:	Bluetooth, Converters Portable Router 3G Speed 4G Speed GPS For Car
TYPE OF ARTWORK TO BE SUPPLIED	email file, Gerber RS-274-X, PCBDOC etc
SERVICE AREA	Worldwide, Globally.

Flexible Circuits Capability

Product Name	Flexible Circuits
Type	1-8 Layer
Quality Grade	Standard IPC 2
Material	DuPont PI, Domestic Shengyi PI
Board Size	Min 6mm*6mm, Max 400mm*500mm
Board Thickness	0.6mm - 2.0mm
Copper Thickness	0.5oz - 2.0oz
Min Tracing / Spacing	3mil
Solder Mask Sides	As per the file
Solder Mask Color	Green, White, Blue, Black, Red, Yellow
Solder Stop Coating	PI and PET Film
Silkscreen Sides	As per the file
Silkscreen Color	White, Black, Yellow
Surface Finishing	HASL, HASL Leadfree, Immersion Tin, Gold Finger, OSP
Min Annular Ring	4mil
Min Hole Diameter	8mil
Tolerance Dimension	±0.05mm
Other Tech	Peelable Solder Mask, Stiffener

 

Single Layer FPC Structure:

This kind of fpc is simple structure FPC.Usually made by Raw material and stick band copper clad laminates,those three raw materials are basic production material of fpc .

First the clad laminates need etching then get the circuit we want. The protective film need drill vias then get pads.

Then clean it up with rolling process to combine both together.

Then do the ENIG or HASL surface finishing to protect the pad. In this way fpc board will be made.

Usually need stamping exactly corresponding and form small printed circuit board.some fpc factory didn't use use protection,this cost will be very low,but the circuit board strength will become bad. Except for the strength need low level,price need low ,better us paste protective film.

 

Double FPC Structure:

When the board circuits are very complex and single board can not reach functions needs,we need choose double fpc or multilayers fpc .The difference bewtween single layer fpc and mutilayer fpc are add via design series so that connect all layers clad copper.

Usually the first step to make vias. Drilling vias on the base material can clad copper are first step. And the next step is almost same to single layer fpc.

Workshop